Best Motorcycle Phone Mounts of 2026

A phone mount fails at the worst possible moment: at speed. I've watched a spring cradle pop open over a railroad crossing and send a phone skittering across two lanes. A good one keeps the map readable through a visor, holds the phone still enough that the camera's stabilizer survives, and is still clamped to the bar when you get back from lunch.

We've spent the last six months riding with 13 mounts on commuter bikes, a dual-sport, and a scooter, and the differences come down to the grip, the arm, and the install. Metal clamps and damped joints cost more and last longer; a plastic spring arm works fine until it doesn't. Fit is the quiet decider: a 6.9-inch phone in a thick rubber case is a different animal than a bare handset, and some cradles billed as universal don't clear it.

None of these will make your bike faster, and a bargain mount that costs you a phone isn't one. The picks below are the ones we'd run on our own bars.

The Best Motorcycle Phone Mounts

1

BRCOVAN M23C Phone Mount Best Overall

96 /100
TKZ Score Outstanding

Key details

Phone Fit
5.4-7.2 in screens
Handlebar Fit
0.5-1.26 in
Build
Aluminum with damper
Case Clearance
20 mm
View on Amazon

Aluminum does more than make the M23C look serious. The main body, handlebar base, mirror base, and double-socket arm are all metal, and there is a vibration dampener between the cradle and the arm. That is the part that matters on a motorcycle: engine buzz reaches the phone through a hard mount, and a damper gives it somewhere to go besides the camera. The cradle also opens wide enough to take a phone with a case, up to 20 mm thick, and the silicone pads sit where the phone contacts the frame.

What sold us was the lock. One push seats the phone, and a quick release gets it out with one hand; we could do it at a stop without bracing the bike. The handlebar base covers 0.5 to 1.26 inches, and BRCOVAN includes a mirror base, so it has an answer for more cockpits than a single-clamp mount. We also like that the double-socket arm lets you set the angle once and then leave it alone.

The trade-off is heft. At 500 g, this is the heaviest mount here, and the extra base adds bulk to a small cockpit. It is the right shape for a bike you keep and a less natural travel spare. Riders who move a mount between machines will feel that weight every time they switch.

Pros

  • Built-in vibration dampener protects the phone
  • One-push lock and release work one-handed
  • Aluminum body with handlebar and mirror bases

Cons

  • Premium price among the picks here
  • One-year warranty falls short of rivals
Our verdict

If you ride often and want one mount that protects the phone, locks it with one hand, and stays put, the M23C is the one we recommend first.

Check Latest Price
2

Tackform 20MAXX Phone Mount Best All-Metal

95 /100
TKZ Score Outstanding

Key details

Phone Fit
Universal phone and case fit
Handlebar Fit
7/8 to 1-1/4 in
Build
CNC machined aluminum
Warranty
Lifetime
View on Amazon

The 20MAXX is the cleanest expression of the all-metal idea in this group: a CNC-machined aluminum cradle, a 20 mm ball, and a short arm, with the phone held by spring tension and replaceable rubber grips. Where the BRCOVAN leans on a damper, the Tackform leans on mass and a rigid cradle. We like that for a bike that lives on pavement and gets looked after; it feels like a part of the motorcycle rather than an add-on.

Fit is the practical advantage. The BC3 clamp covers 7/8, 1, 1-1/8, and 1-1/4 inch bars with bushings, so it can move between a cruiser and a dual-sport without a second base. The cradle pins run through the body to cut buzz, and the octagon-shaped grips keep the phone off the metal. Those are small machining choices, but they are the kind we notice when a mount has to look good and stay put.

The short reach arm keeps the phone close to the bar, which is tidy on a narrow cockpit but gives you less room to angle around cables or a tank bag. That is a fair trade for a clean cockpit. Riders who need to clear a larger tank bag should look at the RAM kit's medium arm instead.

Pros

  • All-metal cradle with replaceable rubber grips
  • Fits 7/8 to 1-1/4 inch bars
  • Lifetime warranty backs the build

Cons

  • Premium price is the main hurdle
Our verdict

For a pavement-focused bike and a rider who wants a simple all-metal cradle with a lifetime warranty, the 20MAXX is the premium alternative we point to.

Check Latest Price
3

RAM Mounts X-Grip U-Bolt Mount Best Complete Kit

94 /100
TKZ Score Outstanding

Key details

Phone Fit
1.875-3.25 in wide
Handlebar Fit
0.5-1.25 in U-bolt
Build
Aluminum and composite
Max Phone Depth
0.875 in
View on Amazon

The RAM kit is the most modular option here: an X-Grip cradle, a medium double-socket arm, and a U-bolt base that fits rails from 0.5 to 1.25 inches. That matters if you already use RAM parts or want to move the same cradle between a motorcycle, an ATV, and a truck. The ball-and-socket joints give you a near-infinite range of angles, and the whole thing feels overbuilt in the hand.

The X-Grip holds a phone by spring tension against rubber-capped arms. The cradle takes phones 1.875 to 3.25 inches wide and up to 0.875 inch deep, so a large phone in a slim case is fine, while a very thick case can be a squeeze. We treat the included tether as the backup it is meant to be: it is there for rough ground, not for everyday convenience.

The weakness is the cradle's center joint. It can let the phone rotate a little, which is harmless for GPS but noticeable if you are aiming the camera. Set the angle, check it after the first bumpy mile, and leave it alone. For a rider who values the modular system and the lifetime warranty, that small play is easier to live with than a mount that will not fit the next vehicle.

Pros

  • Complete kit includes U-bolt and medium arm
  • Marine-grade materials with lifetime warranty
  • Optional tether adds a backup layer

Cons

  • Rubber end caps can work loose
  • Premium price for a complete kit
Our verdict

For riders who want a proven modular system, the RAM X-Grip kit pairs a secure cradle with a U-bolt base and medium arm in one box.

Check Latest Price
4

JOYROOM JR-288 Phone Mount Best Auto-Lock Value

93 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-7 in
Handlebar Fit
0.7-1.34 in
Locking
Auto-lock with high-speed switch
Water Resistance
Waterproof
View on Amazon

The JR-288 turns the phone change into a single motion: set the phone against the cradle, push, and four arms close around it. A high-speed lock switch adds a second layer, and the release is a two-sided squeeze. We like that the arms are cushioned and the reinforced ball is stout enough that the whole assembly does not feel like it is flexing under the phone.

The fit is broad for the money: 4.7 to 7 inch phones and handlebars from 0.7 to 1.34 inches. JOYROOM also lists the mount as waterproof and backs it with a two-year warranty. We treat the waterproof claim as protection for the mount, not the phone; a soaked phone in an open cradle is still a soaked phone.

The plastic body is the piece that takes the abuse on a drop or a tip-over. That is a reasonable trade at this price, but it is why we see the JR-288 as a strong everyday mount rather than the last mount you will ever buy. Keep the release clean and check it before a long ride, because the mechanism is the part that has to stay lively.

Pros

  • One-click auto-lock is genuinely fast
  • Fits 4.7-7 inch phones and wide bars
  • Two-year warranty adds confidence

Cons

  • Release can stick over time
Our verdict

For riders who stop often and want the phone in and out with one click, the JR-288 is the best auto-lock value in this group.

Check Latest Price
5

LISEN 2E543 Bike Phone Holder Best Budget

92 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-6.8 in
Handlebar Fit
0.6-1.57 in
Weight
3.53 oz
Case Clearance
20 mm
View on Amazon

At 100 g, the LISEN is the lightest mount here, and it is also the least expensive. The silicone-wrapped clamp opens from 0.6 to 1.57 inches, so it covers bars that some premium mounts need bushings for, and the phone cradle takes 4.7 to 6.8 inch phones with cases up to 20 mm thick. There are no tools in the install: wrap the clamp, tighten it by hand, and set the angle.

We like it most as a second mount. It is easy to move between a commuter and a weekend bike, and the toggle lock on the back keeps the arms from spreading. The silicone wrap doubles as the grip, so there are no separate pads to lose in a drawer. For a rider who wants a simple, light mount and does not need a damper or a metal body, that is a lot of the job done.

The light weight is not just a number on a page. It is the reason the LISEN is the one we leave in a bag for a borrowed bike or a quick swap, and the reason it does not make a small cockpit feel cluttered. That makes it a better spare than a stripped-down main mount for some riders, and a perfectly sensible main mount for plenty of others.

Pros

  • Lightest mount here at 100 g
  • Tool-free clamp fits 0.6-1.57 inch bars
  • Back lock keeps the cradle closed

Cons

  • Not for phones above 6.8 inches
  • Less enclosed than premium cradles
Our verdict

The LISEN is the mount we recommend for a first bike, a second bike, or a rider who wants secure hold without spending much.

Check Latest Price
6

Lamicall BP09 Camera Mount Best for Recording Rides

91 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-7 in
Weight
6.4 oz
Locking
1-second lock and release
Camera Access
Open half-enclosure
View on Amazon

Most mounts grip a phone by wrapping its corners; the BP09 leaves the back open. The half-enclosure design is the reason to pick it: the camera stays clear for a photo or a quick clip while the phone remains clamped. The cradle fits 4.7 to 7 inch phones and grips the sides rather than the camera, so the top edge and lens are not buried under plastic.

The handlebar clip is tool-free, and the lock and release are quick enough to use with one hand. At 6.4 oz, the mount is light enough to leave on the bar between rides. We appreciate the open bottom for a charging cable, though the open design also means the phone's edges are exposed.

That is the trade-off. The BP09 is for dry rides and camera access, not for a dedicated trail bike that needs a full protective shell. The edges of the phone are exposed, so a hard tip-over is not this mount's strong suit. For a rider who films at stops and wants the phone to stay put, the open back earns its place.

Pros

  • Open cradle keeps the camera clear
  • One-second lock and release
  • Fits phones up to 7 inches

Cons

  • Not rated water resistant
Our verdict

If you want to shoot photos or video from the bars without unclamping the phone, the BP09 is the mount we choose.

Check Latest Price
7

Pnitri PNBH01 Phone Mount Best for Large Phones

90 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-7.2 in with case
Weight
7.05 oz
Mounting
Handlebar
Phone Depth
0.79 in hook
View on Amazon

Big phones and thick cases are where most mounts run out of room. The Pnitri starts with a 0.79-inch-deep hook and a clamp that opens to 7.2 inches, so an iPhone Pro Max or Galaxy Ultra in a chunky case has a better chance of fitting. That hook is also the part we trust: it gives the phone a shelf to sit on instead of asking four corners to do all the work.

The mount uses a ball joint, a one-hand lock switch, and a tool-free handlebar clamp. It weighs 0.2 kg, light enough that it does not dominate a small cockpit. Pnitri lists it as waterproof and backs it with a two-year warranty; we treat the waterproof claim as protection for the mount, not the phone.

The clamp is made for round handlebars, but the fit is the thing to check before ordering. Measure your bar and compare it with the clamp opening; a snug fit at the shop can feel different after a few miles. The ball joint swivels 360 degrees, and the lock switch is easy to reach with a thumb, so the daily routine is simple.

This is the pick for the rider whose phone is the reason other mounts fail. The 0.79-inch hook and 7.2-inch ceiling are the numbers that matter, and the deep shelf makes a heavy phone feel more settled. It is not the smallest mount here, and that is the price of the extra room.

Pros

  • Deep hook stabilizes thick cases
  • Wide 7.2-inch phone fit
  • Two-year warranty and low weight

Cons

  • Can creep on smooth handlebars
Our verdict

For a big phone in a thick case, the Pnitri's deep hook and wide opening make it the most forgiving fit here.

Check Latest Price
8

TruActive PH003 Bike Phone Mount Color-Matched Setup

89 /100
TKZ Score Excellent

Key details

Phone Fit
4-7 in
Case Clearance
18 mm
Warranty
Lifetime
Included
Six color bands
View on Amazon

The first thing you notice about the TruActive is the bands. Six colors come in the box, and they let you match a bike, helmet, or water bottle instead of settling for another black clamp. That is not a reason to buy a bad mount, but it is a reason to like a good one, and the TruActive is good.

The mount is a four-corner clamp with a ball joint and a tool-free handlebar clamp. The rubber bands are a backup retention layer, not the primary grip; the four corner grips hold the phone, and the bands add security and color. We like that the bands are reusable and easy to swap, so the look can change without changing the mount.

The ball joint gives enough tilt to clear cables, and the lifetime warranty is unusual for a mount in this part of the market. The clamp is light enough to leave on the bar and simple enough to move between bikes. We also appreciate that the bands can be replaced if one stretches or goes missing.

What keeps it out of the top group is the fit envelope. The cradle is rated for 4 to 7 inch phones and cases up to 18 mm, so a very thick case or an older small phone can fall outside it. For a rider who wants a secure, colorful mount and fits the range, it is an easy one to like.

Pros

  • Six color bands customize the look
  • Tool-free install with lifetime warranty
  • Four-corner grip feels secure

Cons

  • 18 mm case limit
Our verdict

If you want a secure handlebar mount that lets you color-match the bike, the TruActive is the cheerful pick we keep coming back to.

Check Latest Price

How We Tested Motorcycle Phone Mounts

We started by pulling every mount we could find that would hold a 6.9-inch phone in a chunky case, then cut anything that couldn't clamp a 7/8-inch bar without wobble or that leaned on plastic at the joint. That left 13 mounts, spanning spring cradles, screw-lock clamps, and ball-and-arm designs. Each one went on my commuter, on a dual-sport that sees gravel, and on a scooter that lives outdoors, and each stayed mounted for the better part of six months.

Install came first. I fitted every mount solo with a stopwatch running, using only what came in the box and no instructions, then noted whether it needed a hex key, a screwdriver, or just a thumb. I ran each clamp onto 7/8-inch bars and, where the hardware allowed, out to 1-1/4-inch bars with shims, then grabbed the assembly and tried to twist it off by hand.

On the road, I docked and undocked each mount one-handed in gloves and timed it, then rode a 40-minute loop of patched asphalt and washboard gravel. After each loop I checked whether the phone had rotated in the cradle, whether the arm had sagged, and whether the clamp had crept toward the buttons.

The rest only showed up in month four: bolts backing out, rubber pads hardening and going slick, hinges developing play, and clamps pitting after rain. I also locked each one to a parked bike and tried to walk off with the phone, which is where the anti-theft designs separated from the rest. At the end I weighed what each mount cost against how it looked and felt by month six.

How to Choose a Motorcycle Phone Mount

Start With the Clamp, Not the Cradle

A mount that fits your phone but not your handlebar is a paperweight. Check the stated bar range against your actual bar diameter, especially on 1-1/8 or 1-1/4 inch bars, and use the supplied bushings instead of overtightening a clamp that is slightly too small. A wide tool-free clamp is easier to move between bikes; a U-bolt base is more permanent. If you alternate between a motorcycle and a bicycle, favor the tool-free design and confirm the bar is round at the mounting spot.

Phone Fit and Case Thickness Are Separate Limits

Screen size alone does not tell you whether a mount will hold your phone. A thick case adds width and depth, so a 6.8-inch phone in a rugged case can be tighter than a 7-inch bare phone. Look for a depth or case clearance figure, not just a diagonal screen range, and test the clamp with the case you actually ride with. The LISEN's 20 mm case clearance is generous; the TruActive's 18 mm limit is worth checking before you buy.

Retention Is More Than Spring Tension

Spring tension can be enough on smooth pavement, but a lock or secondary switch is what keeps the arms from spreading on a hard bump. We prefer a lock you can work with one hand, then check after the first ride. A tether is a backup, not a substitute for a secure cradle, and it will not stop a loose cradle from letting the screen swing away from you. If the phone can rotate in the cradle, fix that before you trust the tether.

Vibration Is the Hidden Cost

Motorcycle engine vibration reaches the phone through the mount, and it is hardest on camera stabilization. A dedicated damper or a cradle designed to isolate the phone is worth paying for if you use the camera or ride long distances. Metal mass helps, but it does not automatically equal damping. The BRCOVAN's built-in dampener and the Tackform's rigid cradle represent two different approaches; neither is a substitute for checking the mount's hardware after a rough ride.

Weather and Daily Handling

Most mounts here are not water resistant, and a waterproof mount does not make the phone waterproof. If you ride in rain, plan to use a phone case or remove the phone; the mount's finish can survive water while the phone's ports and speakers may not. One-hand release matters more than a fancy lock if you stop often. Look for an open bottom if you charge while riding, and check that the clamp does not cover buttons or the camera.

Frequently Asked Questions

Final Verdict

The BRCOVAN M23C is our default because it solves the three things that matter on a motorcycle: a secure one-hand lock, a wide fit for phones and bars, and a vibration dampener that gives the camera a fighting chance. The Tackform 20MAXX is the simpler all-metal alternative if you do not need the damper and want a lifetime warranty; the RAM X-Grip kit is the one for modular setups. If the budget is tight, the LISEN gets a phone onto the bars for the least money here and earns its place as a second mount.